OUOIO Custom Motorization Sheer Weave Solar Shades
-
Estimated Delivery:Dec 07 - Dec 11
-
Free Shipping & Returns: On all orders over $75
OUOIO Custom Motorization Sheer Weave Solar Shades
- 【100% Blackout - Excellent Material】: Made of 100% blackout Striped Jacquard fabric coated with white backing, feeling soft and smooth. Our shade blind features a clean & modern look equipped with aluminum bottom rod. Our Cordless roller shade is made of durable fabric and sturdy hanging system.
- 【Safety Cordless Design】: The best safety solution for your children and pets. Our spring-loaded mechanism has passed 5,000 times usual lifting or pulling down tests for each shade.To open the roller blind, pull it at whatever position you want. To shut the roller blind, you can gently pull the buckle and the roller blind would automatically close.
- 【Multiple Function and Scenario】：Our roller blinds let in sunlight while blocking out UV rays. It also works well in noise reducing and privacy protection. Great for bedroom, living room, bathroom, kitchen, French door and office.
- 【Measurement】: For inside mount, window frame should have at least 3” depth, and blackout roller shades will have a tiny light gap on each side. 【IMPORTANT】:Our fabric size is 1 inch smaller than the size you select. To avoid light gap, consider the outside mount. For outside mount, shade should be 4” - 6” wider than window frame, shade length should be at least 2” longer than the window length for better coverage.
- 【Easy Installation & Care】: Our window roller shade contains an accessory kit including metal bracket, screws and install instruction for convenience. Clean with damp cloth, Low Iron. If accessories are missing or broken, please message us and we will resend the accessories ASAP.
How to measure for roman shades
Refer to the above link for additional instructions.
How to measure for roman shades
Perfect fit for a beautiful window starts with accurate measurements. Once you’ve decided whether you’d like to mount your custom roman shades inside or outside the window frame, use our handy guide below to measure for a flawless fit.
To ensure a perfect fit for outside mount Roman shades, follow these detailed measurement steps. Use a steel tape measure and record measurements to the nearest 1/8 inch, measuring each window individually as sizes may vary slightly.
1. Determine Mount Type
First, decide whether to mount your Roman shades inside or outside the window frame. Outside mount shades cover the entire window frame and are installed on the wall above the window, on the ceiling, or on the molding around the window frame. This option works well when the window frame depth is insufficient or there are obstructions around the frame.
2. Measure Length (Height)
- Measurement Area: Start from the wall above the window or the top of the window frame and measure down to where you want the shade to end. We recommend extending the shade 2-3 inches beyond the top and bottom of the window to minimize light leakage.
- If the Window Has a Protruding Sill: Consider the sill height. If the shade extends too far below the window, it may block the sill. In this case, stop the shade at the sill level to ensure smooth operation.
- Consistency for Multiple Windows: For multiple windows of similar height in the same room, order all shades based on the tallest measurement to ensure consistent pleats.
3. Measure Width
- Measurement Area: Measure from one side of the window frame to the other, adding an additional 2-3 inches on each side (4-6 inches total) to prevent light seepage from the sides.
- Note on Width: Most fabric rolls are 54 inches wide. If your Roman shade width exceeds 50 inches, expect vertical joining hems to be added to achieve the required width. This is an industry standard, as fabric suppliers must add seams to create wider shades.
4. Choosing Length and Width Fractions
On the ordering page, you’ll see options for “Length Fraction” and “Width Fraction.” For instance, if you need shades that are 36.50 inches long, select “36” for Length and “1/2” (or .50 inch) in the Length Fraction dropdown.
5. Submit Exact Measurements
For outside mount Roman shades, the measurements you provide will be the final finished dimensions (with a tolerance of a few millimeters). We will not make any deductions from your measurements, so providing precise measurements will ensure a perfect fit for your shades.
Refer to the above link for additional instructions.
Standard shipping: 20-30 days.
View the complete SHIPPING POLICY.